Educational Qualification

PhD (Mechanical Engineering), Indian Institute of Technology Delhi (IITD), New Delhi (India) 2007
Master of Engineering (Manufacturing Technology), Thapar Institute of Engineering & Technology, Patiala, Punjab (India)
Bachelor of Engineering (Production Technology), Panjab University, Chandigarh (India)

Experience

1993 – present
Since 1993, he is working as a faculty member in the Department of Mechanical Engineering of the Sant Longowal Institute of Engineering & Technology (SLIET),
Longowal, Punjab, India, at different positions.Currently he is an Associate Professor in the same department. SLIET is an autonomous institution of the Govt. of India, and recognized as a university by the University Grants Commission (UGC) of India. The National Board of Accreditation (NBA) and the National Assessment and Accreditation Council (NAAC) accredit the department of Mechanical Engineering.
2011 – 2013
He was a visiting researcher at the National Institute of Standards and Technology (NIST), Gaithersburg, USA.

Award

Institute Medal for scoring highest CGPA in Master of Engineering, 2000.
College scholarship for 1st position in Bachelor of Engineering, 1992
Certificate of academic excellence, 1986
National Scholarship for being in Punjab State merit list in the matriculation examination,
1985

Publications

Journals:
Parting line determination for die-casting/Feature recognition
1) R. Singh, J. Madan and R. Kumar, 2013, Automated identification of complex undercut features for side-core design for die-casting parts, IMech Journal of Engg. Mfg. -Part B. (Article in press)
2) R. Singh and J. Madan, 2013, Systematic Approach for Parting Line Determination for Die-cast Parts, Robotics and Computer Integrated Manufacturing.(Published online: //dx.doi.org/10.1016/j.rcim.2013.02.002i)
3) J. Madan, P. V. M Rao and T. K. Kundra, 2009, Optimal parting direction selection for die-casting, International Journal of Manufacturing Technology and Management, vol. 18, no. 2, p 167-182.
4) J. Madan, P. V. M Rao and T. K. Kundra,
2007, Die-casting Feature Recognition for Automated Parting Direction and Parting Line Determination, Transactions of ASME Journal of Computing and Information Science in Engineering, vol. 7, pp. 236-248.
Sustainability of manufacturing processes
1) J. Madan, Mahesh Mani, Jae Hyun Lee, Kevin W. Lyons, 2014, Sustainability Characterization for Manufacturing Processes, International Journal of Production Research. (Article in press)
2) P. Singh and J. Madan, 2013, Computer-aided Sustainability Assessor for Die-casting, International Journal of Adv. Manufacturing Technology. (Article available online)
Design-for-manufacturing
1) J. Madan, P. V. M Rao and T. K. Kundra, 2007, System for Early Cost Estimation of Die-cast Part, International Journal of Production Research, vol. 45, no. 20, pp. 4823-4847.
2) J. Madan, P. V. M Rao and T. K. Kundra,
2007, Computer aided manufacturability analysis for die-cast parts, Computer Aided Design & Applications, vol. 4, Nos. 1-4, pp. 147-158.
3) R. L. Virdi,
K. Goyal, J. Madan, 2010, Concept and Guidelines for Design for Manufacturability: A Shift from Traditional Design Concept, Indian Journal of Engineering, Science, and Technology, vol. 4, no. 1, p 86-89.
Computer-aided die design
1) V. Kumar, J. Madan and P. Gupta, 2013, Computer-aided gating system design for multi-cavity die-casting dies, International Journal of Production Research. (Draft under preparation)
2) C. D. Singh, J. Madan and A. Singh, 2013, Computer Aided Design of Gating System for a Die-Casting Die, International Journal of Computer Applications in Technology, vol. 46, no. 2, 113-127
3) V. Kumar,
J. Madan and P. Gupta, 2012, A system for design of multi-cavity die-casting dies from part product model, International Journal of Advanced Manufacturing Technology. (Published online DOI: 10.1007/s00170-012-4633-y)
4) V. Kumar, J. Madan and P. Gupta, 2012, System for Computer Aided Cavity Layout Design for Die-casting Dies, International Journal of Production Research, vol. 50, no. 18, pp. 5181-5194.
Process simulation
1) S. Kumar, K. K. Mishra and J. Madan, 2010, Stress Analysis of Spur Gear using FEM Method, Indian Journal of Engineering, Science, and Technology, vol. 4, no.1, p 82-85.

Conferences:
Sustainability of manufacturing processes
1) J. Madan, M. Mani and K. W. Lyons, 2013, Characterizing energy consumption for the injection molding process, ASME Manufacturing Science and Engineering Conference, Madison, Wisconsin, USA, June 8-12.
2) K. Singh,
P.P. Singh, J. Madan, R. Kumar, 2013, A computer-aided system for life cycle inventory of an aluminium extrusion plant, Proceedings of Int. Conf. on Production and Industrial Engineering (CPIE-2013), Jalandhar, India, March 29-31, pp 302-307.
3) M.Mani,
J. Madan, J. H. Lee, K. W. Lyons and S. K. Gupta, 2012, Characterizing Sustainability for Manufacturing Performance Assessment, ASME IDETC/CIE, Chicago, USA, Aug 12-15.
4) P. Singh,
J. Madan, M. Mani and A. Singh, 2012, A computer aided system for sustainability analysis for die-casting process, ASME Manufacturing Science and Engineering Conference, University of Notre Dame, Indiana, USA, June 4-8.
Parting line selection/feature recognition
1) R. Singh, J. Madan and R. Kumar, 2012, Automated identification of complex undercut features for side-core design for die-casting parts, 4th International and 25th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2012), Jadavpur University, Kolkata, India, Dec. 14-16.
2) J. Madan,
A. Singh and S. Kumar, 2008, Recognition of intersecting features and identification of separable regions for design-manufacturing integration, International Conference on Digital Factories (ICDF 2008), Coimbatore Institute of Technology, Coimbatore, Aug. 11-13.
3) J. Madan, P. V. M Rao and T. K. Kundra,
2006, Automated parting direction and parting line determination for die-cast parts, Design for Product Life Cycle (DPLC 2006), BITS Pilani, India, Feb. 17-18.
Design for manufacturing
4) J. Madan, P. V. M Rao and T. K. Kundra, 2007, Automated design for manufacturability analysis for die-cast parts, International CAD Conference and Exhibition, Honolulu, Hawaii, USA, June 25-29.
5) J. Madan,
2004, Recent advances in design for manufacturability systems, Emerging Trends in Manufacturing Systems (ETMS 2004), SLIET, Longowal, Punjab, Jan. 17-18.
Computer-aided die design
1) V. K. Sharma and J. Madan, 2011, System for computer aided cavity layout design for die-casting dies, 39th North American Manufacturing Research Conference (NAMRC), Oregon State University, Oregon, USA, June 13-17.
2) V. K. Sharma, J. Madan and P. K. Gupta, 2010, Development of a system for automatic cavity layout design of die casting dies, International CAD Conference and Exhibition, Dubai, UAE, June 21-25.
3) V. Kumar,
J. Madan and P. Gupta, 2010, Cavity layout design methodology for die- casting dies, 2nd National Conference on Precision Manufacturing (NCPM-2010), SLIET, Longowal, Punjab, India, March 26-27.
Reverse engineering/CAD
4) S. Kansal, J. Madan and A. Singh, 2013, A systematic approach for CAD model generation from point cloud data, IEEE International Advance Computing Conference, Ghaziabad, India, Feb. 22-23.
5) K. Goyal and J. Madan, 2010, Current issues in CAD model data exchange: A review, 2nd National Conference on Precision Manufacturing (NCPM-2010), SLIET, Longowal, Punjab, India, March 26-27.
Computer-aided manufacturing
1) J. Madan and B. S. Pabla, 2003, NC part program generation with optimized machining parameters for cylindrical components using feature based odelling systems, International Conference on Automation Robotics and Factories of Future (INCARF 2003), IIT Delhi, New Delhi, Sept. 11-13.
2) J. Madan and B. S. Pabla, 2003, NC code generation with optimized machining parameters for cylindrical components using FBM systems, National Conference on Mechanical Engineering (NCME 2003), TIET, Patiala, India, Oct. 31-Nov. 1.
3) B.S Pabla and J. Madan, 2000, NC Part Program Generation with Feature Based Modeling System for Turned Components, at XVI National Convention of Mechanical Engineers, University of Roorkee, India, Sept. 29-30.
Process simulation
1) S. Kumar and J. Madan, 2010, Meshless methods for process simulation of die castings: A review, 2nd National Conference on Precision Manufacturing (NCPM 2010), SLIET, Longowal, Punjab, India, March 26-27.
2) S. Patyal, I. Goyal and J. Madan, 2008, Knowledge based system for computer aided design and analysis of gear train, Proceedings of the National Conference on Mechanism Science and Technology: from Theory to Application (NCMSTA 2008), National Institute of Technology, Hamirpur, India, Nov. 13-14.

Technical Reports
Sustainability of manufacturing processes
1) M. Mani, J. Madan, J. H. Lee, K. W. Lyons and S. K. Gupta, 2013, Review on Sustainability Characterization for Manufacturing Processes, NIST Internal Publication. (NISTIR-7913)

Research

Research interests
• Environmentally Sustainable Design and Manufacturing
• Design for Manufacturing and Assembly
• Design Automation
• Computer-aided Design and Manufacturing
• Product Design and Development

Funded projects
• System for automated design of a die-casting die, funded by the All India Council of Technical Education (AICTE), Rs. 9, 00, 000/- (2009-12)
• Up-gradation of computer-aided design and manufacturing laboratory for research and training to industry people, funded by the Ministry of Human Resource Development (MHRD), Govt. of India, Rs.7, 00, 000/-, (2003-2005)

Master’s dissertations supervised
• A computer-aided life cycle analysis of aluminium extrusion plant (Karamjit Singh, 2011-12)
•A systematic approach for CAD model generation of hole features from point cloud data (Sachin Kansal, 2011-12)
• A system for CAD model generation of edge formations from point cloud information (Mehak Sharma, 2011-12)
• A computer-aided system for sustainability analysis of the injection molding processes (Sandeep Socal, 2011-12)
• A computer-aided system for sustainability analysis of the turning an drilling processes (Naseeb Singh, 2011-12)
• Development of feature library for die design (Chandan Deep Singh, 2010-11)
• A computer aided system for sustainability analysis of the die-casting process (Princepal Singh, 2010-11)
• Optimization of cutting tool parameters for machining (Tejinderpal Singh, 2008-09)
• Stress analysis of spur gears using finite element methods (Kamlesh Kumar Mishra, 2008-09)
• Recognition of intersecting features with planar surfaces for manufacturing applications (Avtar Singh, 2007-08)

PhD thesis supervision
• Automated Design of a Die from Part Product Model, Vijay Kumar (In progress)
• Design-manufacturing Integration for Die-casting, Ranjit Singh (In progress)
• Process Simulation of Pressure Die-casting, Sunil Kumar (In progress)
• Study of impact of flexibilities on performance of FMS, Amrik Singh (In progress)