Ranbir Singh

Basic Details

Name

Ranbir Singh
Designation

Assistant Professor
Department

Mechanical Engineering

Contact

Phone (O)

NA
Phone(R)

NA
Mobile

NA
e-mail

ranbirrai1313@gmail.com

Educational Details

Educational Qualification

PhD (Submitted) from SLIET, Longowal, Punjab.

Master of Engineering (M.E.) in Mechanical Engineering from Chitkara University, Rajpura, Punjab.

B. Tech. in Mechanical Engineering, IKGPTU, Kapurthala, Punjab.

Experience

Experience

Assistant Professor – SLIET (August 2025 – Till Now).

Teaching Assistant – Chitkara University (August 2018 – May 2021).

Lecturer – Desh Bhagat University (May 2016 – July 2018).

Patent

Patent

1. Serving Tray with Snack Boxes, Ranbir Singh Rooprai, Mandeep Singh. (Patent Design No. 338799-001, dated 03/03/2022) – Published.

2. Mobile cum Pen Holder, Ranbir Singh Rooprai, Mandeep Singh. (Patent Design No. 340119-001, dated 08/03/2022) – Published.

3. Smokeless Stove, Ranbir Singh Rooprai, Mandeep Singh. (Patent Design No. 343713-001, dated 04/04/2022) – Published.

Award

Award

Recipient of the SLIET Quality Publication Award twice in 2025 (January and August) for outstanding research contributions.

Awarded the GIA Research Fellowship by MHRD to pursue PhD studies.

Qualified GATE 2021.

Publications

Publications

SCI/ESCI Journal Publications

1. Ranbir Singh Rooprai, Vikrant Singh, Jagtar Singh, Anuj Bansal, Anil Kumar Singla, Vijay Kumar, and Talvinder Singh. Enhanced Abrasion and Corrosion Resistance of AISI316-VC Composite Claddings on 080M40 Steel Using WAAM-CMT Technique. Journal of Materials Engineering and Performance, pp. 1–21, (2025).

2. Ranbir Singh Rooprai, Anuj Bansal, Jagtar Singh, Vikrant Singh, Anil Kumar Singla, and Harvinder Singh. Investigating the Dry Abrasion Behavior of AISI316 Clads on 080M40 Steel Using a Wire Arc Additive Manufacturing Process. Surface Review and Letters, (2025).

3. Ranbir Singh Rooprai, Jagtar Singh, Anuj Bansal. Investigating Wear Performance of EN8 Steel Cladded with AISI316 Steel Using the WAAM-CMT Process. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062251342066, (2025).

4. Ranbir Singh Rooprai, Vikrant Singh, Jagtar Singh, Anuj Bansal, and Anil Kumar Singla. Optimizing Wear Performance in VC-Reinforced AISI316 Composite Claddings via WAAM. Journal of Materials Engineering and Performance, pp. 1–17, (2025).

5. Ranbir Singh Rooprai, Vikrant Singh, Jagtar Singh, Anuj Bansal, and Anil Kumar Singla. Investigating Wear Characteristics of Inconel 625 and VC-Based Claddings on EN8 Steel Developed by WAAM. Journal of Materials Engineering and Performance, pp. 1–19, (2025).

6. Vikrant Singh, Ranbir Singh Rooprai, Gautam Kunal, Anuj Bansal, Jagtar Singh, Samandeep Kaur, and Anil Singla. Finite Element Analysis Driven Study on SS316 Cladding of Mild Steel for Enhanced Durability in Agricultural Tools. International Journal on Interactive Design and Manufacturing, pp. 1–15, (2024).

7. Vikrant Singh, Gautam Kunal, Ranbir Singh Rooprai, Anuj Bansal, and Anil Singla. FEA-Guided Development of Inconel 625 Clad on Mild Steel Using WAAM and Their Cavitation Erosion Resistance. International Journal on Interactive Design and Manufacturing, pp. 1–15, (2024).

8. Ranbir Singh Rooprai, Anuj Bansal, and Jagtar Singh. Slurry Abrasion Behaviour of ERNiCrMo-3 Cladding on EN8 Steel Developed by WAAM. Materials Letters, Vol. 960, 136043, (2024).

9. Ranbir Singh Rooprai, Jagtar Singh, and Anuj Bansal. Influence of TiC Powder Content on Wear Behaviour of Inconel 625 Clads Developed by Hybrid-Mode Wire Arc Additive Manufacturing (WAAM) on EN-8 Steel. Tribology International, Vol. 189, 108937, (2023).

10. Hrishav Raushan, Anuj Bansal, Vikrant Singh, Anil Kumar Singla, Johnny Singla, Ankita Omer, Jagtar Singh, Navneet Khanna, Deepak Kumar Goyal, Ranbir Singh Rooprai. Dry Sliding and Slurry Abrasion Behaviour of Wire Arc Additive Manufacturing-Cold Metal Transfer (WAAM-CMT) Cladded Inconel 625 on EN8 Steel. Tribology International, 108176, (2023).

 

Conference Proceedings

 

1. Ranbir Singh Rooprai, Jagtar Singh, Anuj Bansal, Vikrant Singh, Anil Kumar Singla, Navneet Khanna. Advanced SS316-VC Claddings on EN8 Steel Using Wire Arc Additive Manufacturing-Cold Metal Transfer (WAAM-CMT) for Corrosion Resistance in Tillage Tools. ASME International Mechanical Engineering Congress & Exposition (IMECE), (2025) (Accepted).

2. Talvinder Singh, Mohit Rana, Vijay Sharma, Abhineet Saini, Kamaljeet Singh, Astha Gehlot, Ranbir Singh Rooprai, Jaswinder Singh. Investigation of Multi-Variables Through Weight Calculation Approach for Face Milling of EN 31 Alloy Steel. Materials Today: Proceedings, Vol. 69, pp. 354–360, (2022).

3. Ranbir Singh Rooprai, Harvinder Singh, Talvinder Singh, and Yogesh Kumar Singla. Analysis of the Wear Properties of Through-Hardened AISI-4140 Alloy Steel Using Taguchi Technique. Materials Today: Proceedings, Vol. 50, pp. 661–664, (2021).

4. Ranbir Singh Rooprai, Harvinder Singh, and Yogesh Kumar Singla. Investigating the Tribological Properties of AISI 4140 Alloy Steel Under Various Loads and Sliding Speed. IOP Conference Series: Materials Science and Engineering, Vol. 1145, No. 1, p. 012038. IOP Publishing, (2021).

5. Ranbir Singh Rooprai, Talvinder Singh, Maninderjeet Singh, Mohit Rana, Vijay Kumar Sharma, and Sonu Sharma. Multi-Variable Optimization for Surface Roughness and Micro-Hardness in MQL Assisted Face Milling of EN31 Steel Using Taguchi Based Grey Relational Analysis. Materials Today: Proceedings, Vol. 43, pp. 3144–3147, (2021).

6. Ranbir Singh Rooprai, Talvinder Singh, Mohit Rana, Vijay Kumar Sharma. Optimization of Wear Parameters for AISI 4140 Using Taguchi Grey Relational Analysis. Materials Today: Proceedings, Vol. 50, pp. 293–296, (2021).

7. Mohit Rana, Talvinder Singh, Abhineet Saini, Jaswinder Singh, Vijay Kumar Sharma, Maninderjeet Singh, and Ranbir Singh Rooprai. Multi-Response Optimization of Nozzle Process Parameters in MQL Assisted Face Milling of AISI 52100 Alloy Steel Using TGRA. Materials Today: Proceedings, Vol. 44, pp. 3177–3182, (2021).

8. Talvinder Singh, Vijay Kumar Sharma, Mohit Rana, Abhineet Saini, Ranbir Singh Rooprai, and Maninderjeet Singh. Multi-Response Optimization of Process Variables in MQL Assisted Face Milling of EN31 Alloy Steel Using Grey Relational Analysis. Materials Today: Proceedings, Vol. 47, pp. 4062–4066, (2021).

 

Book Chapters

 

1. Ranbir Singh Rooprai, Jagtar Singh, Anuj Bansal. Investigating the Slurry Abrasion Behaviour of ERNiCrMo-3 Clads on 080M40 Steel Using a Wire Arc Additive Manufacturing Process. In National Conference on Advanced and Emerging Materials for Technological Applications, pp. 71–80, (2025).

2. Ranbir Singh Rooprai, Jagtar Singh, Anuj Bansal. Analysis of the Wear Behavior of Inconel 625 Clads on EN8 Steel Developed by WAAM Process. In Taylor & Francis Book, CRC Press, (2025) (Accepted).

3. Vikrant Singh, Ranbir Singh Rooprai, Anuj Bansal, Anil Kumar Singla, Jagtar Singh, and Jonny Singla. Microstructural, Wettability, and Cavitation Erosion Behavior of HVOF Sprayed VC+75% CuNi-Cr Coating on SS316 Steel. In National Conference on Advanced and Emerging Materials for Technological Applications, pp. 133–141, (2025).

4. Jonny Singla, Vikrant Singh, Jagtar Singh, and Ranbir Singh Rooprai. Influence of Post Heat Treatment on Slurry Erosion Behavior of Wire Arc Additive Manufactured (WAAMed) Inconel-625. Key Engineering Materials, Vol. 1010, pp. 65–72, (2025).

5. Ranbir Singh Rooprai, Jaswinder Singh. Insights of 3D Printing Technology with Its Types: A Review. In Additive Manufacturing with Medical Applications, CRC Press, Taylor & Francis Group, pp. 15–29, (2022).

6. Ranbir Singh Rooprai, Vikrampreet Singh, Talvinder Singh. Experimental Study on Rice Straw-Based Thermal Insulation. In Lecture Notes in Mechanical Engineering, pp. 1–10, (2021).

 

Scopus-Indexed Journals

 

1. Ranbir Singh Rooprai, Talvinder Singh. Optimization of Process Parameters for MRR and TWR Using Mixed Electrolyte in ECDM Setup. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 10, Issue 3, (2020).

2. Talvinder Singh, Mohit Rana, Abhineet Saini, Vijay Sharma, Ranbir Singh Rooprai. Statistical Evaluation of Cutting Temperature and Surface Roughness During Face Milling of EN31. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 10, Issue 3, (2020).