Dr. Jagtar Singh

Basic Details


Dr. Jagtar Singh




Mechanical Engineering Department


Phone (O)







jagtarsliet@gmail.com, jagtarsingh@sliet.ac.in

Educational Details

Educational Qualification

Ph.D.(Mechanical Engineering), NIT Kurukshetra, INDIA
M.Tech (Mechanical Engineering), Thapar Institute of Engineering and Technology, Patiala
B.E. (Mechanical Engineering), Gulbarga University, Gulbarga, INDIA

Professional Memebership

Professional Membership

Membership/Fellowship of Professional Societies
(I) Life member IWS (Indian Welding Society)
(II) Life member ISTE (Indian Society for Technical Education)
(III) Life member SMES (SLIET Mechanical Engineering Society)



*Appreciation Letter:- Certificate of appreciation awarded by National Project Implementation Unit for proper implementation of Technical Education Quality Improvement Programme (Phase-III) as TEQIP Coordinator.
*Got distinction in B.E. Mechanical Engineering from University at UG level.



1. Anuj Bansal, Jagtar Singh, Harpreet Singh, Deepak Kumar Goyal, Influence of Thickness of Hydrophobic Polytetrafluoroethylene (PTFE) Coatings on
Cavitation Erosion of Hydro-machinery Steel SS410. Wear, In press, https://doi.org/10.1016/j.wear.2021.203886
2. Anuj Bansal, Jagtar Singh, Harpreet Singh, Investigating slurry erosion behavior of a hydro-machinery steel under various impingement variables.
Materials Today: Proceedings 41 (2021) April 795–800
3. Anil K Singla, Maiak Banerjee, Aman Sharama, Jagtar Singh, Anuj Bansal, Munish Kumar Gupta, Navneet Khanna, Deepak Kumar Goyal. Selective laser
melting of Ti6Al4V alloy: Process parameters, defects and post-treatments. Journal of Manufacturing Processes Vol:64, April 2021, Pages 161-187
4. Shivam Pandey ,Ankita Omer, Anil Kumar Singla, Deepak Kumar Goya, Jagtar Singh, Munish Kumar Gupta. Effect of Fuel Pressure, Feed Rate, and Spray
Distance on Cavitation Erosion of Rodojet Sprayed Al2O3+50%TiO2 Coated AISI410 Steel. Surface & Coatings Technology Feb , 2021
5. Anuj Bansal Jagtar Singh Harpreet Singh Slurry Erosion Behavior of HVOF-Sprayed WC-10Co-4Cr Coated SS 316 Steel with and Without PTFE Modification,
Journal of Thermal Spray Technology, 28(7), 1448-1465, October, 2019
6. Anil Singla, Jagtar Singh,Vishal Sharma Impact of cryogenic treatment on mechanical behaviour and microstructure of Ti-6Al-4V ELI biomaterial,
Journal of Materials Engineering and Performance, 28(10)/5931-5945, October 2019
7. Anil Kumar Singla Jagtar Singh, Puneet Kumar, Anumay Kumar, Vishal S. Sharma, Effect of cryogenic treatment on the wear resistance and
microstructure of Ti-6Al-4V, Indian Journal of Engineering and Material Sciences, 25(3) /243-249, June, 2018
8. Anil Singla, Jagtar Singh, Vishal Sharma, Processing of materials at cryogenic temperature and its implications in manufacturing: A review Materials
and Manufacturing Processes, 33 (15), 1603-1640, 2018
9. Jagtar Singh, Kulwant Singh, TP Singh Enhancing the Abrasive Wear Resistance of Rotary Blade Material (AISI 30MnCrB4) by Cryogenic Treatment
NISCAIR-CSIR, India 77 (2), 92-97, Feb, 2018
10. Richa Sharma, Jagtar Singh, Vikas Rastogi The impact of total productive maintenance on key performance indicators (PQCDSM)-A case study of
automobile manufacturing sector, International Journal of Productivity and Quality Management, 24 (2), 267-283, 2018
11. Gurmit Singh, Kulwant Singh, Jagtar Singh, Experimental comparison of friction stir welding process and TIG welding process for 6082-T6 Aluminium
alloy Materials Today, Proceedings 04 / pp 3590-3600 (2017)
12. LP Singh, Jagtar Singh,, Effect of cryogenic treatment on the microstructure and wear behavior of a T-42 tool steel Materials Testing 57 (04)/pp
13. L Singh, J Singh, Assessment of crop residue potential for power generation using geographical information system, JSIR, 74 (01), pp 34-37
14. Jagtar Singh, Sharma SK, Panesar BS, Geographical distribution of agricultural residues and optimum sites of biomass based power plant in Bathinda,
Punjab. Biomass and Bioenergy 35 (02)2011, pp 4455-4460
15. Jagtar Singh, Sharma SK, Panesar BS, A mathematical model for transporting the biomass to biomass based power plant
Biomass and Bioenergy 34 (2010), pp 483-488
16. Modgil Vikas, Jagtar Singh, Sharma SK, Performance modeling and availability analysis of shoe upper manufacturing unit, International Journal of
Quality & Reliability Management, IJQRM, 30 (08) 2013,pp 816-831.
17. Jagtar Singh, Kulwant Singh, Productivity measurement model for district level government hospital. Industrial Engineering Journal , 01 (12)
2009,pp. 6-11
18. Jagtar Singh, Kulwant Singh, Gurdeep Singh, Mathematical modeling of exhaust emission of a spark ignition engine on LPG. Indian Journal of
Engineering, Science and Technology Vol 04(01) 2010, pp 95-100
19. Jagtar Singh, Sharma SK, Panesar BS, Energy potential through agricultural biomass using geographical information system – A case study of Punjab,
Biomass and Bioenergy, 32, 2008, pp 301- 310
20. Jagtar Singh, LP Singh, Ankur Kaushik, Enhancing wear resistance of En45 spring steel using cryogenic treatment. Friction & Wear Research Vol 01,
Issue 2 2013 pp 24-29
21. LP Singh, Jagtar Singh, Optimization of cutting parameters using cryogenically treated high speed steel tool by Taguchi application. International
Journal of Manufacturing, Materials and Mechanical Engineering Vol. 3, (01) 2013 pp 26-38
22. LP Singh, Jagtar Singh, Effects of cryogenic treatment on the cutting tool durability, International Journal of Design and Manufacturing Technology
Vol. 3, Issue 1, 2012 pp. 11-23
23. Modgil Vikas, Jagtar Singh, Sharma SK, Performance analysis of sole pasting unit in shoe making industry under pre-emptive priority repairs IUP
Journal of Science and Technology, Vol 8, No1, 2012,pp 48-60.
24. Modgil Vikas, Jagtar Singh, Sharma SK, Performance modeling and availability analysis of ammonia cylinder manufacturing plant, International
Journal of Research in Mechanical Engineering and Technology, Vol01 (01) 2011,pp 45-49.
25. Modgil Vikas, Jagtar Singh, Sharma SK, Performance modeling and availability analysis of sole lasting unit in shoe making industry. Nature and
Science, Vol. 10(2) No. 2, 2011
26. Gurmeet Singh, Jagtar Singh, Kulwant Singh, Modeling the effect of process parameters on tensile strength of friction stir welded aluminium alloy
joints, Experimental techniques, Vol 38, 2014, pp 63-71
27. Gurmeet Singh, Jagtar Singh, Kulwant Singh, Effect of process parameters on microstructure and mechanical properties of friction stir welding of
aluminium alloy, Transactions of Indian Institute of Metals , (Springer) DOI 10. 1007/s 12666-011-0101-x
28. Gurmeet Singh, Jagtar Singh, Kulwant Singh, Developing parametric window and mathematical model to predict micro hardness of friction stir welded of
aluminium alloy. Int. J. Materials Engineering Innovations, Vol.2(3/4) 2011,pp 279-287.
29. Gurmeet Singh, Jagtar Singh, Kulwant Singh, Effect of axial force on mechanical and metallurgical properties of friction stir welded AA 6082 joints.
Advanced Materials Research 383 (2012), pp 3356-3360
30. Richa Sharma, Jagtar Singh, Vikas Rastogi, Total Productive Maintenance review: a case study in automobile manufacturing industry, International
Journal of Current Engineering & Technology, Vol 03, No.05, 2010, pp 2010-2016
31. Richa Sharma, Jagtar Singh, Vikas Rastogi, Implementation of 5S practices: a review Uncertain Supply Chain Management Journal , Vol 2, 2013, pp
32. Richa Sharma, Jagtar Singh, Vikas Rastogi, Measurement of overall equipment effectiveness through total productive maintenance initiatives in
automobile sector: A case study, International Journal of Contemporary Practices
33. Jagtar Singh, Anil Singla, Sanjeev Bansal, A Productivity measurement model for technical education institutes. Productivity, Journal, 48(2), pp
34. Lakhwinder Singh, Jagtar Singh, Evaluation of crop residue potential for power generation for Indian state Punjab International journal of
Agriculture and Veterinary Sciences, Vol 4, (04), 2013, pp 99 -112.