Name

Dr. Pardeep Gupta

Designation

Professor and Dean (Planning and Development)

Department

Mechanical Engineering Department

Experience

Professor, Mech. Engg. Department, SLIET, Longowal, Sangrur since 10.03.2007
Associate Professor,
Mech. Engg. Department, SLIET, Longowal, Sangrur since from 01.01.2006 to 10.03.2007
Assistant Professor, Mech. Engg. Department, SLIET, Longowal, Sangrur from 10.03.99 to 31.12.2005.
Lecturer,
Production Engg. Department, SLIET, Longowal, Sangrur from 20.02.91 to 10.03.99
Foundry Engg. Goetge India Ltd. Patiala from 20.08.89 to Sept. 90

Professional Membership

a) Life Member of ISTE (LM 27778)
b) Life Member of Punjab Science Congress (L-450)
c) Life member of SLIET Mechanical Engineering Society
d) Member, International Association of Engineers (IAENG)

Award

Awarded Best Paper Award for a paper entitled “A study on the implementation of Office TPM Pillar in an Indian industry, ’’ presented in National Conference on Industrial Engineering and Technology Management, October 29 – 31, 2014, NITIE, Mumbai.

Publications

Papers Published, Communicated for Publication in International/National Journals:

[1] Gupta P., Singh J., and Singh I.P., ‘‘Behavioral Analysis of Duplex Casting System under Preventive Resume Priority Repair Discipline a Case Study’’, Industrial Engineering Journal Vol. XXXIII No.12, December 2004, ISSN 0970-2555.
[2] Gupta P.,
Singh J., and Singh I.P., ‘‘Maintenance Planning based on Performance Analysis of 7-out-of-14: G Chemical-system: a Case Study, ’’ International Journal of Industrial Engineering, ISSN 1943-670X, 12(3), pp 264-274, 2005, [IF 0.203]
[3] Gupta P.,
Singh J., and Singh I.P., ‘‘Mission Reliability and Availability Prediction of Flexible Polymer Powder Production System’’, OPSEARCH, Vol.42, No. 2, 2005.
[4] Gupta P.,
and Gupta A., ‘‘Availability improvement of a production system under preventive maintenance’’, Industrial Engineering Journal, ISSN 0970-2555, Vol. XXXV No.8, August 2006.
[5] Goyal A.,
Sharma S.K., Gupta P. ‘‘Availability Analysis of a Part of Rubber Tube Production system under Preemptive Resume Priority Repair’’, International Journal of Industrial Engineering 16(4), 260-269, December 2009.
[6] Gupta P.,
Modgil V., and Goyal A., ‘‘Performance Analysis of the Yarn Production subsystem a part of Carded Yarn Manufacturing Plant – A case study’’, Journal of Mathematics and Systems Sciences, Vol. 5, No. 2, December 2009 (ISSN: 0975-5454).
[7] Goyal A., Sharma S.K., Gupta P. ‘‘System Modeling and Behanioral Analysis of Biscuit Baking System-A Part of Biscuit Manufacturing System’’, Industrial Engineering Journal, ISSN 0970-2555, 2009.
[8] Goyal A.,
Sharma S.K., Gupta P. ‘‘Performance Modeling and Availability study Rubber Tube Extraction System under Preemptive Resume Priority Repair’’, Udyog Pragati – The Journal for Pacticing Managers, ISSN 0970-3365, Vol. 34, No.1, January – March, 2010.
[9] Jayant A.,
kumar S., Gupta P. and Garg S.K., “Supply Chain Management: An Integrated Approach for Performance Improvement –A Case of Manufacturing Unit”, Journal of IMS Group Vol.07, Jan-June2010, pp 82-97.ISSN: 0973-824X.
[10] Kumar V.,
Madan J., and Gupta P. “Cavity Layout Design Methodology for Diecasting Dies” International Journal of Engineering Studies, ISSN 0975 – 6469, 2:3, pp 263-270, November 2010.
[11] Goyal A., Sharma S.K., Gupta P. and Singhal S. ‘‘Availability prediction for the soap noodle making system – A case study’’, International Journal of Engineering Studies, ISSN 0975 – 6469, November 2010.
[12] Jayant A., Kumar S., Gupta P. and Garg S.K., “Perspectives in Reverse Supply Chain Management: A state of the Art Literature Review”, Jordan Journal of Mechanical and Industrial Engineering (JJMIE), Volume 6, Number 1, pp-87-102. Feb.2012, ISSN 1995-6665.Feb. 2012.[ IF 0.17]
[13] Goyal A. and Gupta P. ‘‘Performane Evaluation of a Multi-State Repairable Production System – A Case Study’’, International Journal of Performability Engineering, Vol. 8, No. 3, ISSN 09731318, pp 330-338. May, 2012.
[14] Kumar V., Madan J. and Gupta P. “System for computer aided Cavity Layout Design for Diecasting Dies” International Journal of Production Research,
Vol. 50, No. 18, ISSN 0020 – 7543, pp 5181-5194, April 2012.
[15] Gupta P., Khanna R. and Gupta R., ‘‘Effect of Process Parameters on Kerf Width in WEDM for HSLA using Response Surface Methodology’’, Journal of Engineering and Technology, ISSN:0976-8580, Volume 2, Issue 1, pp 1-6, Jan-June 2012.
[16] Jayant A.,
Patel V., Gupta P. and Garg S.K., ‘‘ Implementation of Supply Chain Management in an Automobile Company: A case study’’, Indore Management Journal, ISSN: 0975-1653, Vol. 3, Spl. Issue 2 Vol. 3, Spl. Issue 2, pp 90-104, 2012.
[17] Kumar V., Madan J. and Gupta P. “A System for Design of Multi-Cavity Die Casting Dies from Part Product Model” International Journal of Advanced Manufacturing Technology,
ISSN 2083-2107, Vol. 67, 9-12, Nov. 2012 [IF 1.205].
[18] Jayant A., Gupta P. and Garg S.K “Reverse Logistics: Perspectives, Empirical Studies and Research Directions” International Journal of Industrial Engineering: Theory, Application and Practice, ISSN 1943-670X, 2012, [IF 0.203]
[19] Jayant A.,
Gupta P. and Garg S.K., “Closed Loop Supply Chain for Spent batteries: A Simulation Study”, International Journal of Advanced Manufacturing Systems (IJAMS), ISSN: 2229 – 5860, Volume 3, No.1, 2012.
[20] Bhagi L.K., Gupta P., Rastogi V., ‘‘Fractographic investigations of the failure of L-1 low pressure steam turbine blade Reference: CSEFA15’’ Case Studies in Engineering Failure Analysis (Elsevier), ISSN: 2213-2902, Vol. 1, pp. 72-78, 2013.
[21] Vardhan S. & Gupta P., “Study on the implementation of Kobestu Kaizen (KK) Pillar of TPM in a Process industry, ’’Applied Mechanics and Materials, ISSN 1660-9336, Vol. 592-594, pp 2694- 2698, 2014.
[22] Gupta P.,
Vardhan S., Sharma A., “The Impact of Implementation of Jishu-Hozen Pillar in an Industry: A Case Study”, Journal of Sustainable Manufacturing and Renewable Energy, Nova Science Publishers, ISSN: 2153-6821, Volume 3 Issue 1-2, 2015.
[23] Gupta P.,
Vardhan S., Sharma A., “Organizational motivation to achieve manufacturing excellence through TPM in an automobile industry”, Journal of Mechatronics and Intelligent Manufacturing, Nova Science Publishers, ISSN: 1949-4904, Volume 3 Issue 3- 4, 2015.
[24] Gupta P.,
Vardhan S., “Optimizing OEE, productivity and production cost for improving sales volume in an automobile industry through TPM: A case study”, International Journal of Production Research Vol. 50, No. 18, ISSN 1365 – 588X (online) DOI: 10.1080/00207543.2016.1145817 I.F: 1.477 (Thomson Ruter).
{25] Bhagi, L. K., Gupta, P. and Rastogi, V., (2016), “Study of corrosive fatigue and life enhancement of low pressure steam turbine blade using friction dampers”, Journal of Mechanical Science and Technology, SCI index with impact factor 0.761, Thomson Reuter (Accepted for publication in forthcoming volume 31 issue 1).
[26] Bhagi, L. K., Gupta, P. and Rastogi, V., (2013), “Fractographic investigations of the failure of L-1 low pressure steam turbine blade”, Journal Case Studies in Engineering Failure Analysis, 1 (2), pp. 72-78. (Source Normalized Impact per Paper (SNIP): 1.751 and SCImago Journal Rank (SJR): 0.616)

Research

A. Research areas of interest: Production engineering, Metal Machining, Quality Engineering, TPM, TQM.
B. Guided following M.Tech./Ph.D. Thesis:
1. M. Tech. thesis guided: 21
2. Ph.D. Thesis guided: 04 degree awarded, 02 thesis submitted, 05 pursing